ꁆ ꁇ

16 Ports 10/100/1000Mbps Managed PoE Switch with 4 Ports 10G SFP+

 

SP7500-16GP4TF-L3M

DOWNLOAD
Button

---  Layer 3 smart management with Console port

---  Support remote web managed,VLAN and Qos and IPV4/IPV6 managementl etc.

---  Support Static route，RIP，OSPF  etc.

---  with 4 Ports 10G SFP+ Slot

---  Fully IEEE802.3af/at standard compliant.
---  Support PoE power up to 15.4/25.5W for each PoE ports.
---  Support 250m PoE distance transmission
---  Reliable and great value.
---  6KV Surge protection

---  19 inch Rack mount Installation


 

 

 

 

Designed for Video Security solution 

Managed PoE Switch

낂 Inquiry
ꁲ
 
끸
Verification code
Submit

  • Designed for scalable deployments, this 16-port Smart Gigabit PoE+ Switch features four 10G SFP+ uplinks for flexible connectivity. With enterprise-grade security, QoS, and VLAN capabilities, it meets diverse networking needs from corporate offices to campus environments. The intelligent SmartLink power management prioritizes critical devices during overloads, automatically shedding non-essential loads to maintain operations while protecting switch integrity - delivering cost-effective performance for growing businesses.

     

     

     

     

    Autonomous PoE Port Sentinel

    Equipped with intelligent monitoring, these PoE switches automatically detect and restart unresponsive surveillance cameras to ensure uninterrupted 24/7 operation.

     

     

     

    PD status good

     

     

     

    PoE Camera

     

     

     

    Data Request

     

     

     

    Data Echo

     

     

     

    Detect alive status

    for around 90s

     

     

     

    Data Request

     

     

     

    PoE Camera

     

     

     

    Reboot PoE camera

    if without response

     

     

     

    PoE

     

     

     

    ON

     

     

     

    OFF

     

     

     

    PoE Camera

     

     

     

    PoE Camera

     

     

     

    ON

     

     

     

    PoE

     

     

     

    OFF

     

     

     

    PD Alive

     

     

     

    Step 1

     

     

     

    Step 2

     

     

     

    Step 3

     

     

     

    Step 4

     

     

     

    AI-Optimized Power over Ethernet System
    Engineered for demanding surveillance networks, this PoE+ switch delivers 30W per port (300W total budget) across its 10/100/1000Mbps ports (802.3af/at compliant), plus four 10G SFP+ uplinks for high-bandwidth backhaul. The optimized power distribution supports simultaneous operation of multiple high-performance IP cameras without compromising network throughput. 

     

     

     

    PoE/Port

     

     

     

    PoE/Port

     

     

     

    af/15.4W

     

     

     

    at/30W

     

     

     

    VOIP System

     

     

     

    Network Security solution

     

     

     

    Wifi Network Solution

     

     

     

    LED  Light

     

     

     

    High-Density 10G Uplink Connectivity

    Featuring quad 10G SFP+ uplinks (10Gbps line-rate), this advanced PoE switch delivers uncompromised bandwidth for mission-critical surveillance systems. The intelligent PoE port management maximizes power efficiency while guaranteeing carrier-grade external network connectivity.

     

     

     

    Modular Scalability Framework

    Four integrated SFP+ slots support dual-rate 10GBASE-SX/LX optics, enabling network administrators to select modules based on both distance (330m-2km multimode / 20-120km single-mode) and performance requirements. Ideal for enterprise data center interconnects and distribution networks, these flexible fiber interfaces ensure optimal connectivity.

     

    Unified Policy Management Dashboard

    Benchu's SP7500 Managed PoE Switch simplifies network administration through intuitive Web/SNMP interfaces and an embedded Device Management System (DMS). Designed for surveillance and enterprise deployments, it delivers plug-and-play operation with streamlined configuration and troubleshooting - reducing total cost of ownership while optimizing user experience.

     

     

     

    IPv6-Centric Network Transformation Package

    Featuring IPv6/IPv4 dual-stack technology and intuitive management interfaces, the SP7500 series enables seamless IPv6 migration for IP surveillance, VoIP, and wireless deployments. It allows SMBs to transition to IPv6 networks with zero upfront investment while maintaining full backward compatibility.

     

     

     

    Next-Generation Routing Intelligence

    The SP7500 series supports advanced networking capabilities including LACP aggregation, Q-in-Q VLANs, MSTP, static routing (RIP/OSPF), L2/L4 QoS policies, bandwidth management, and IGMP/MLD snooping. It enables resilient port trunking with up to 9 trunk groups (2 ports each) featuring automatic failover protection for uninterrupted connectivity.

     

    Enterprise-Grade Overvoltage Protection

    Certified to IEC61643-21:2000 standards, this industrial PoE switch provides 6KV surge protection on all ports, safeguarding against lightning strikes and power surges. Its rugged design ensures reliable 24/7 operation in extreme environmental conditions.

     

     

     

    SP7500-16GP4TF-L3M

    16 Ports 10/100/1000Mbps managed PoE swtich with 4 Ports 10G SFP+ Uplink ,6KV surge protection,IEEE802.3af/at  

    Ordering  Information

    Resilient Ring Topology with Sub-50ms Protection Switching

    Engineered for mission-critical operations, the SP7500 Series delivers <20ms recovery in ring topologies with MSTP (802.1s) and dual power inputs. Its industrial-hardened design prevents network outages and security breaches through instantaneous self-healing - ensuring 24/7 reliability in extreme factory conditions.

  • Hardware Specifications

    Copper Ports

    16 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port

    4 x 10GBASE-X SFP interface shared with port-17 to port-20，Supports 10Gbps dual mode and DDM

    SFP/mini-GBIC Slots

    Jumbo Frame

    10K bytes

    16 ports with 802.3at / af PoE injector function with port-1 to port-16

    PoE Injector Port

    Console

    1-RJ45 serial port (115200, 8, N, 1)

    Switch Architecture

    Store and forward

    Switch Fabric

    256Gbps / non-blocking

    Reset Button

    < 5 sec: System reboot；   > 5 sec: Factory default

    PWR, SYS, LNK/ACT, PoE-in-Use

    LED

    Link Aggregation

    IEEE 802.3ad LACP and static trunk
    Supports 8 groups of 8-port trunk

    Power Requirements

    100~240V AC, 50/60Hz, auto-sensing

    Dimensions (W x D x H)

    440 x 290 x 44.5 mm, 1U height (17.32in x 11.42in x 1.75in)

    Enclosure

    Metal

    802.1Q tagged-based VLAN 
    Up to 256 VLAN groups, out of 4094 VLAN IDs
    802.1ad Q-in-Q tunneling
    Voice VLAN
    Protocol VLAN
    Private VLAN (Protected port)

    GVRP

    VLAN

    Per port 52V DC, 30.8 watts (max.)

    PoE Power Output

    ESD Protection

    Contact Discharge 4KV DC；Air Discharge 8KV DC

    IEEE 802.3x pause frame for full-duplex；Back pressure for half-duplex

    Flow Control

    Address Table

    32K entries 

    96.72Mpps

    Switch Throughput@64Bytes

    TX / RX / both；Many-to-1 monitor

    Port Mirroring

    Layer 2 Functions

    300W

    PoE Power Budget

    PoE Power Supply Type

    End-span

    1/2(+), 3/6(-)

    Power Pin Assignment

    Power over Ethernet

    IEEE 802.3af / 802.3at PoE+ PSE

    PoE Standard

    7.2 megabits

    Shared Data Buffer

    PoE Management

    Open or close port
    Standard POE scheduling management Power and current display
    Automatic restarting function of equipment dead machine Timing reactivation
    Support IP bindings restarting

    STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol

    Spanning Tree Protocol

    IGMP (v2/v3) snooping
    IGMP querier
    Up to 256 multicast groups

    IGMP Snooping

    MLD Snooping

    MLD (v1/v2) snooping, up to 256 multicast groups

    Access Control List

    IPv4/IPv6 IP-based ACL / MAC-based ACL

    Temperature: -40 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
     

    Storage

    Security

    IEEE 802.1X port-based authentication
    Built-in RADIUS client to co-operate with RADIUS server
    RADIUS / TACACS+ user access authentication
    IP-MAC port binding
    MAC filtering
    Static MAC address
    DHCP Snooping and DHCP Option82
    STP BPDU guard, BPDU filtering and BPDU forwarding
    DoS attack prevention
    ARP inspection
    IP source guard


     

    8 mapping ID to 8 level priority queues 
    - Port number 
    - 802.1p priority
    - 802.1Q VLAN tag
    - DSCP field in IP packet
    Traffic classification based, strict priority and WRR

    QoS

    RFC 1213 MIB-II
    RFC 1215 Generic Traps
    RFC 1493 Bridge MIB
    RFC 2674 Bridge MIB Extensions
    RFC 2737 Entity MIB (Version 2)
    RFC 2819 RMON (1, 2, 3, 9)
    RFC 2863 Interface Group MIB
    RFC 3635 Ethernet-like MIB

    SNMP MIBs

    Secure Management Interfaces

    SSH, SSL, SNMP

    Management Functions

    Web browser / Telnet / SNMP v1, v2c, V3
    Firmware upgrade by HTTP / TFTP protocol through Ethernet network
    Remote / Local Syslog
    System log
    LLDP protocol 
    SNTP

    Basic Management Interfaces 

    Standards Compliance 

    IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    RFC 3810 MLD version 2

    Standards Conformance 

    FCC Part 15 Class A, CE 

    Regulation Compliance 

    Temperature: -20 ~ 55 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)

    Operating

    Environment 

    Layer 3 Features

    IPV4/IPV6 VRRP, the maximum group is 255
    IPV4/IPV6 static route/default route supports up to 128 entries
    IPV4 dynamic routing, RIPv1/v2, OSPFv2, BGP4+, 4000 routing entries
    IPV6 dynamic routing OSPFv3, BGP+, RIPng, IPV6 management, 1000 routing entries
    L3 network management function, IPV4/IPV6 dual-stack management
    Layer 3 routing and forwarding, support communication between different network segments and different VLANs 

  • Seamless Protection Matrix with PoE

    Combining power and data delivery over Cat5 cables, the SP7500 Gigabit PoE+ Switch features 16 multi-speed ports (10/100/1000M, 802.3af/at compliant) and four 10G SFP+ uplinks. This rack-mountable (19") solution delivers full wire-speed performance for security applications, offering cost-effective deployment in both rack and desktop configurations.  

     

    PoE

     

     

     

    PC Group

     

     

     

    PoE  IP

    Camera

     

     

     

     

    SP7500-16GP4TF-L3M

     

     

     

     

    Laptop

     

     

     

    PoE Wireless AP

     

     

     

     

     

    IP Camera

     

     

     

     

    PC Group

     

     

     

    PoE VoIP phone

     

     

     

     

    PoE VoIP phone

     

     

     

     

    PoE Splitter  

     

     

     

    PC Group

     

     

     

    Monitoring Center 

     

     

     

    Server

     

     

     

    Monitoring Center 

     

     

     

    Firewall

     

     

     

    Router

     

     

     

    Internet

     

     

     

    SP7500-16GP4TF-L3M

     

     

     

     

    SP7500-24GP4TF-L3M

     

     

     

     

    PoE

     

     

     

    PoE

     

     

     

    PoE

     

     

     

    PoE

     

     

     

    PoE

     

     

     

    Smart Office Power over Ethernet Switching System

    Benchu's SP7500 PoE Switch enables cost-effective office expansion by powering IEEE 802.3af/at-compliant IP phones through standard Ethernet cabling, eliminating separate power wiring. This integrated solution simplifies VoIP deployment while reducing infrastructure costs by up to 60% compared to legacy systems, creating a unified network for data, voice and power with enterprise-grade reliability.

     

     

     

    Wifi Public

     

     

     

    Lighting 

     

     

     

    IEEE802.3at  PoE+

    VoIP Phone

     

     

     

    IEEE802.3at  PoE+

    IP Camera

     

     

     

    Office Area

     

     

     

    IEEE802.3at  PoE+

    LED  light

     

     

     

    IEEE802.3at  PoE+

    WiFi

     

     

     

    IEEE802.3at  PoE+ Splitter

     

     

     

    PoE

     

     

     

    IEEE802.3at  PoE+ Extender

     

     

     

    PoE

     

     

     

    PoE

     

     

     

    PoE

     

     

     

    School

     

     

     

  • Datasheet