8 Ports 10/100/1000Mbps Managed PoE Switch with 2 Ports 2.5G SFP+
SP7500-8GP2XF-L2M
--- Fully Layer2 Web smart management with Console port
--- with 2 Ports 2.5G SFP+ Solt
--- Fully IEEE802.3af/at standard compliant.
--- Support PoE power up to 15.4/25.5W for each PoE ports.
--- Plug & Play. No configuration required.
--- Reliable and great value.
--- 6KV Surge protection
--- 11 inch Rack mount Installation
Designed for Video Security solution
-
This 8 ports WEB Smart Industrial gigabit PoE Switches fill the gap between unmanaged and fully managed switches.It is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2 management implementation. Web based management tool for quick and easy deployment and configuration making it ideal for deploying access points, VoIP phones and IP-based surveillance camera. It comes with 2 Ports 2.5G SFP+ fiber uplink which makes the installation more flexible.
Provide comprehensive security protection system, perfect QoS policy and flexible VLAN function, simple management and maintenance, meet the access and networking requirements of enterprises, communities, hotels, office networks and campus networks, suitable for hotels, campuses, factory quarters and middle schools. Small businesses form a cost-effective network. Supports the SmartLink power management function, which enables the PoE port priority mechanism to be powered off when the system is overloaded, cuts off the power supply of the port with the lower priority and lower priority, ensures that the critical equipment is preferentially powered, and the switch is overloaded run to protect the switch.
PoE AI Watchdog
Detect PoE Camera when it is frozen, and reboot it automatically by the new AI PoE swtichPD status good
PoE Camera
Data Request
Data Echo
Detect alive status
for around 90s
Data Request
PoE Camera
Reboot PoE camera
if without response
PoE
ON
OFF
PoE Camera
PoE Camera
ON
PoE
OFF
PD Alive
Step 1
Step 2
Step 3
Step 4
Smart PoE Power Supply
Featuring multiple 10/100/1000Mbps PoE ports which support IEEE 802.3af/at protocol and 2 Ports 2.5G SFP uplink ports, the PoE Switch Series provides maximum power budget of 120W for all PoE ports and 30W for every single PoE port respectively, allowing users to have several different camera variations configured.
PoE/Port
PoE/Port
af/15.4W
at/30W
VOIP System
Network Security solution
Wifi Network Solution
LED Light
Two 2.5G Uplink Ports
The New release PoE switch comes with 2 Ports 2.5G SFP+ uplink ports with 2500Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the PoE ports can be used to their full potential.
Flexibility and Extension Solution
The additional Two mini-GBIC SFP slots built in the switch support dual speed, 2.5GBASE-SX/LX SFP fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 330 meters to 2km (multi-mode fiber) and to 10/20/40/60/100/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Efficient Secure Management Interface
For efficient management, the Benchu Group SP7500 series managed PoE switch is equipped with Web and SNMP management interfaces. The embedded Device Managed System (DMS) features provides users with the benefits of easy-to-use/configure/install/troubleshoot in the video surveillance, wireless access, and other SMBs and Enterprises applications. It is ideal to deliver management simplicity, better user experience, and lowest total cost of ownership.
Solution for IPv6 Networking
With the IPv6/IPv4 dual stack and other management functions with user-friendly interfaces, the SP7500 are the best choices for IP surveillance, VoIP and wireless service providers to deploy the IPv6 network. More importantly, they help SMBs upgrade their network infrastructures to the IPv6 era without any monetary investment.
Robust Layer 2 Features
The SP7500 series can be programmed for advanced switch management functions, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The SP7500 series allows the operation of a high-speed trunk combining multiple ports. It consists of a maximum of 9 trunk groups with 2 ports for each group, and supports connection fail-over as well.
Surge Protection
This PoE switch is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the PoE Switch from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.SP7500-8GP2XF-L2M
8 Ports 10/100/1000Mbps managed PoE swtich with 2 Ports 2.5G SFP+ Uplink ,6KV surge protection,IEEE802.3af/at
Ordering Information
Redundant Ring, Fast Recovery for Critical Network Applications
The SP7500 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 20ms.
-
Hardware Specifications
Copper Ports
8 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port
2 x 2.5GBASE-X SFP interface shared with port-9 to port-10，Supports 2.5Gbps dual mode and DDM
SFP/mini-GBIC Slots
Jumbo Frame
10K bytes
8 ports with 802.3at / af PoE injector function with port-1 to port-8
PoE Injector Port
Console
1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture
Store and forward
Switch Fabric
256Gbps / non-blocking
Reset Button
< 5 sec: System reboot； > 5 sec: Factory default
PWR, SYS, LNK/ACT, PoE-in-Use
LED
Link Aggregation
IEEE 802.3ad LACP and static trunk
Supports 8 groups of 8-port trunkPower Requirements
100~240V AC, 50/60Hz, auto-sensing
Dimensions (W x D x H)
310 x 180 x 44.5 mm, 1U height (12.2in x 7.09in x 1.75in)
Enclosure
Metal
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)GVRP
VLAN
Per port 52V DC, 30.8 watts (max.)
PoE Power Output
ESD Protection
Contact Discharge 4KV DC；Air Discharge 8KV DC
IEEE 802.3x pause frame for full-duplex；Back pressure for half-duplex
Flow Control
Address Table
16K entries
52.36Mpps
Switch Throughput@64Bytes
TX / RX / both；Many-to-1 monitor
Port Mirroring
Layer 2 Functions
120W
PoE Power Budget
PoE Power Supply Type
End-span
1/2(+), 3/6(-)
Power Pin Assignment
Power over Ethernet
IEEE 802.3af / 802.3at PoE+ PSE
PoE Standard
7.2 megabits
Shared Data Buffer
PoE Management
Open or close port
Standard POE scheduling management Power and current display
Automatic restarting function of equipment dead machine Timing reactivation
Support IP bindings restartingSTP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree ProtocolSpanning Tree Protocol
IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groupsIGMP Snooping
MLD Snooping
MLD (v1/v2) snooping, up to 256 multicast groups
Access Control List
IPv4/IPv6 IP-based ACL / MAC-based ACL
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Security
IEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS / TACACS+ user access authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
8 mapping ID to 8 level priority queues
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP field in IP packet
Traffic classification based, strict priority and WRRQoS
RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIBSNMP MIBs
Secure Management Interfaces
SSH, SSL, SNMP
Management Functions
Web browser / Telnet / SNMP v1, v2c, V3
Firmware upgrade by HTTP / TFTP protocol through Ethernet network
Remote / Local Syslog
System log
LLDP protocol
SNTPBasic Management Interfaces
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2Standards Conformance
FCC Part 15 Class A, CE
Regulation Compliance
Temperature: -20 ~ 55 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)Operating
Environment
-
Perfectly Integrated Solution for PoE IP Security solution
This gigabit PoE Fiber switch provides power and data from a single point, using Power over Ethernet(PoE) over a single Cat5 cable. SP7500 series features 8ch 10/100/1000M PoE ports with 2 Ports 2.5G SFP+ Uplink and supply industry-standard IEEE 802.3af/at power. It also offers a simple, cost-effective and non-blocking wire-speed performance. It comes with a 11-inch rack mount metal housing, suitable for desktop deployment in Network Security application.
PoE
PC Group
PoE IP
Camera
SP7500-8GP2XF-L2M
Laptop
PoE Wireless AP
IP Camera
PC Group
PoE VoIP phone
PoE VoIP phone
PoE Splitter
PC Group
Monitoring Center
Server
Monitoring Center
Firewall
Router
Internet
SP7500-8GP2XF-L2M
S7500-16GF8GC-L3M
PoE
PoE
PoE
PoE
PoE
IP Office Department/Workgroup PoE Switch solution
To further expand the office premises, the additional IP telephones required could be installed at less cost via the PoE IP phone system, better than the traditional circuit wiring telephony system. The Benchu Group SP7500 series PoE Switch helps enterprises to create an integrated data, voice, and powered network. The IEEE 802.3af/at compliant IP phones can be installed without the need of an additional power cable because the power can be provided via the standard Ethernet cable from the connected PoE switch, in this case,VoIp Phone deployment becomes more reliable and cost effective, thus helping enterprises save tremendous cost when upgrading from the traditional phone system to IP telephone communications infrastructure.
Wifi Public
Lighting
IEEE802.3at PoE+
VoIP Phone
IEEE802.3at PoE+
IP Camera
Office Area
IEEE802.3at PoE+
LED light
IEEE802.3at PoE+
WiFi
IEEE802.3at PoE+ Splitter
PoE
IEEE802.3at PoE+ Extender
PoE
PoE
PoE
School
-
-
2020-08-31 8GP-2XF-L2（SP7500-8GP2XF-L2）.pdf
끂993 1.12 MB
Datasheet
-
|
끸
|
|
|
|
|
|
|
|
|
|
|
 |
|
local Lan
