3 ports 10/100Mbs Etherner with 2 Fiber
FMC-100-3FE2Fx
--- Complies with IEEE 802.3 10BASE-T, IEEE 802.3u, 100BASE-TX
--- TP port supports 10/100BASE-T auto-negotiation and auto-
MDI/MDI-X
--- 100BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
--- Wall Mountable design
--- LED indicators for easy network diagnostics
--- Compact in size, easy installation
Designed for Video Security solution
-
This FMC-100 series is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber converter extends network distance with highly performance via fiber optic cable. It provides media conversion between 10/100BASE-T and 100BASE-SX/LX interfaces. There are SC/SFP/WDM connectors with single-mode or multi-mode media for different distance solution as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. As this Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 100BASE-T and IEEE 802.3z 100BASE-LX/SX, the media conversion installation is quite quick and easy with its plug and play feature. The FMC-100 also supports flow control and back pressure in half-duplex to eliminate packet loss.
Distance Extension with High Performance and Steady Network Communications
Benchu Group fiber media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The FMC-100 series Fiber converter series provides media conversion between 10/100BASE-T and 100BASE-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.
FMC-100-3FE2Fx
MC-1400 and FMC-100-FE
FMC-100-3FE2Fx
FMC-100-3FE2Fx
FMC-100-3FE2Fx
3 ports 10/100Mbs Etherner with 2 Fiber
Ordering Information
-
Hardware Specifications
Copper Ports
3 x 10/100BASE-T port，2 x 100BASE-SX SC port
RJ-45 port (Auto-MDI/MDI-X) Twisted Pair
Copper Interface
Fiber Distance
From 550m to 120km distance
Optic Wavelength
TX:1550nm RX:1310nm
DIN-rail kit and wall-mount ear
Installation
100BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
100BASE-LX: 9/125μm single-mode cable,
providing long distance for 10/15/20/30/40/50/60/70/120km (vary on Fiber module)
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
100BASE-TX: 2-pair UTP Cat. 5, up to 100mFlow Control
Fiber-optic Cable
Power Consumption
5 watts Max
Optic Interface
SC
Address Table
PWR
TP LINK/ACT, 100M
Fiber LINK/ACTLED Indicator
10/100Mbps
Speed
Converter Specifications
Operating: 5~90%, (non-condensing)
Storage: 5~90% (non-condensing)
Humidity
FCC Class A, CE Class A
Emissions
Standards Conformance
IEEE 802.3, 10BASE-T
IEEE 802.3u, 100BASE-TX
IEEE 802.3x Full-duplex flow controlStandards Compliance
Operating: -20~55 degrees C
Storage: -40~75 degrees CTemperature
Environment
Weight
0.3kg
Dimensions (W x D x H)
160 x 85 x 26 mm (6.3in x 3.35in x 1.02in)
Power Input
AC 110~220V 50/60Hz
-
Fiber-optic Networking for Long distance solution
With high performance of data transmission and easy installation, the fiber converter can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building), for small office network environment of enterprises.
FMC-100-FE
FMC-100-3FE2Fx
FMC-100-3FE2Fx
-
-
2021-05-18 FMC-100-3FE2Fx.pdf
끂710 731.27 KB
Datasheet
-
|
끸
|
|
|
|
|
|
|
|
|
|
|
 |
|
