Single-Port Gigabit Ultra High power PoE Injector

DOWNLOAD

PSE102-GE-60W

Button

----  All-in-one compact size design
---  Fully IEEE802.3af/IEEE802.3at/IEEE802.3bt compliant
---  Auto detection and protection of Non standard Ethernet

       terminals
---  10/100/1000 Mbps supported
---  Plug & Play. No configuration required
---   Higher conversion efficiency(90%). Lower heat radiation

 

Designed for Video Security solution 

  • Benchu Group Ultra Power over Ethernet Injector provides a maximum of 60-watt power and high-speed Ethernet data connection anywhere in your network infrastructure.it's an excellent choice for power supply and network transmission on PTZ cameras, all-in-one PC, digital display system

     

     

    Quick and Easy Gigabit Ultra Power PoE Network Deployment

    The Ultra PoE Injector is a Single-Port, Ultra Power over Ethernet Injector with a maximum of 60 watts of power output over Ethernet cables. It is designed specifically to meet the demand for growing higher power required network equipment such as:

               ---  PTZ Speed Dome
               ---  AIO (All-in-One) touch PC
               ---  Remote digital signage display
               ---  Other network devices that need higher power to work normally

     

    Benchu Group Ultra Power over Ethernet Injector provides a maximum of 60-watt power and high-speed Ethernet data connection anywhere in your network infrastructure.it's an excellent choice for power supply and network transmission on PTZ cameras, all-in-one PC, digital display system

     

     

    1ch 10/100/1000M PoE Injector.60W      

    PSE102-GE-60W

    PSE102-60W

    1ch 10/100M PoE Injector.60W

    Ordering  Information

    Quick and Easy Cabling Installation for PoE Network Deployment

    Backward compatible with both 802.3af and 802.3at and IEEE802.3bt PoE standards, the Ultra PoE Injector allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. It frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.

     

    All-in-One and Compact Size Design
    With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, Benchu Group PoE Injector is an all-in-one, single-port PoE+ injector with internal power supply. In the compact size housing and it provides one 100-240V AC input socket on its front panel, two LEDs (System POWER and PoE ACTIVE) on the top side and two RJ45 ports (PoE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and this PoE injector is ready to provide high-speed network communication and ultra power PoE injector functions simultaneously with no need of software configuration.

     

     

     

     

    60 watts of Power over 4-pair UTP
    The Ultra PoE solutions use the same cabling standard such as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.

     

     

     

     

    Surge Protection
    This
    PoE Injector is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the PoE Injector from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.

     

     

     

  • Hardware Specifications

    Interface

    “Data” Input Ports: 1 x RJ-45 
    “Data+Power” Output Ports: 1 x RJ-45

    10/100/1000Mbps

    Data Rate

    LED

    PWR/POE

    10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
    100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
    1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)

    Network Cable

    Operating: 5~90%, (non-condensing)

    Storage: 5~90% (non-condensing)

    Humidity

    FCC Class A, CE Class A

    Emissions

    Standards Conformance

    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3ab 1000Base-T Gigabit Ethernet
    IEEE 802.3at Enhancement Power over Ethernet
    IEEE 802.3af Power over Ethernet

     

    Standards Compliance

    Operating: -20~55 degrees C
    Storage: -40~75 degrees C

    Temperature

    Environment 

    Weight

    0.35kg

    Dimensions (W x D x H)

    62 x 146 x 41 mm  (2.44in x 5.75n x 1.61in)

    Power Requirements 

    90-240VAC ,50-60Hz

    Hardware Specifications

    PoE 52V DC, max. 65 watts

    Power Output

    Power over Ethernet

    Power Pin Assignment

    12/45(+),36/78(-)

    PoE Power Supply Type

    Mid-span

  • PoE

     

     

     

    PoE Optimizes the Installation and Power Management of Network Devices 

    This 1 port Power over Ethernet midspan Injector offer an easy,fast and cost effective solution for powering network video products,Power and Data are combined on a single cable, thus eliminating the need for extra power lines and also reducing installation costs and manpower. 

     

    PSE102-GE-60W

    PSE102-60W

  • Datasheet

PoE Injector

Inquiry
 
Verification code

local Lan