24 Ports 10/100/1000Mbps Layer 3 Managed Industrial Switch with 4 -10G SFP+ Uplink

DOWNLOAD

IES7521-24GE4TF-AC

---  24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports

---  4 1G/10GBASE-X mini-GBIC/SFP+ slots 
---  One RJ45 console interface for basic management and setup

---  One USB Interface

---  Suppot Layer 3 managent , Static route,RIP,OSPF etc.
---  Contact Discharge 8KV DC;Air Discharge 15KV DC
---  -40 to 85 degrees C operating temperature

---  Rack-mount design 

 


 

 

 

 

Designed for Video Security and Wireless Covering solution 

  • Highly quality Industrial Switch

    Benchu Group Industrial Ethernet  Solution includes Industrial Rack-mount Switches, DIN-rail Switches, Industrial Media Converters series, 

    90-260V  AC

    Redundant Power Input

     

     

     

    4 x  1G/10G SFP+ Slot

     

     

     

     

    10x  10/100/1000M RJ45

     

     

     

     

    IP40 Rugged Case

     

     

     

    This Industrial switches is a cost-efficient solution and meets the high reliability requirements demanded by industrial applications such as factory assembly line, automation, transportation and heavy Industrial factory, This Hardened switches are designed to operate at -40 to 85°C in harsh environments where high ESD, shock and vibration ma be present and to provide an economical solution for your industrial Ethernet network.

     

    The switches can be easily installed on a DIN rail as well as in distribution boxes. The DIN-rail mounting capability, wide operating temperature capability, and the IP40 housing with LED indicators make the plug-and-play switches easy to use and reliable.

     

     

     

     

    Environmentally Hardened Design for Industrial  Networks

    The IES7521-24GE4TF-AC Industrial switch is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. It is packaged in a compact, IP40 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. , It is also ideal for service providers, campuses and public areas to deploy wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 85 degrees C, so it can be placed in almost any location.

    Flexibility and Extension Solution

    The additional four mini-GBIC SFP+ slots built in the switch support dual speed, 10GBASE-SX/LX SFP fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 300 meters to 10km (multi-mode fiber) and to 20/40/60/100/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

     

    Efficient Secure Management Interface
    For efficient management, the Benchu Group IES7521-24GE4TF-AC managed  switch is equipped with Web and SNMP management interfaces. The embedded Device Managed System (DMS) features provides users with the benefits of easy-to-use/configure/install/troubleshoot in the video surveillance, wireless access, and other SMBs and Enterprises applications. It is ideal to deliver management simplicity, better user experience, and lowest total cost of ownership

     

     

     

    Plug and Power Network Deployment
    All of the RJ45 copper interfaces in the switch support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
     

     

     

     

    Surge Protection
    This Industrial switch is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the ports owns the capacity to keep the Industrial Switch from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.

     

     

     

    IES7521-24GE4TF-AC

    24 Ports 10/100/1000Mbps managed Industrial  swtich with 4 10G SFP+ Uplink ,6KV surge protection

    Ordering  Information

    Redundant Ring, Fast Recovery for Critical Network Applications

    The IES7521-24GE4TF-AC supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 20ms.

  • Hardware Specifications

    Copper Ports

    24 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port

    4 x 1G/10G BASE-X SFP+ interface 

    SFP/mini-GBIC Slots

    Jumbo Frame

    10K bytes

    1 x RS232-to-RJ45 serial port

    Console

    USB

    1 x USB 2.0 Port

    Switch Architecture

    Store and forward

    Switch Fabric

    256Gbps / non-blocking

    Reset Button

    < 5 sec: System reboot;   > 5 sec: Factory default

    PWR, SYS, LNK/ACT

    LED

    Link Aggregation

    IEEE 802.3ad LACP and static trunk
    Supports 8 groups of 8-port trunk

    Power Requirements

    100~260V AC

    Dimensions (W x D x H)

    440 x 290 x 44.5 mm(17.32in x 11.42in x 1.75n)

    ESD Protection

    Contact Discharge 8KV DCAir Discharge 15KV DC

    802.1Q tagged-based VLAN 
    Up to 256 VLAN groups, out of 4094 VLAN IDs
    Voice VLAN
    Protocol VLAN
    Private VLAN (Protected port)

    GVRP

    VLAN

    Weight

    <4Kg

    IEEE 802.3x pause frame for full-duplex;Back pressure for half-duplex

    Flow Control

    Address Table

    16K entries 

    132.61Mpps

    Switch Throughput@64Bytes

    TX / RX / both;Many-to-1 monitor

    Port Mirroring

    Layer 3 Functions

    7.1 megabits

    Shared Data Buffer

    Layer 3 Functions

    IPV4/IPV6 static route/default route supports up to 128 entries

    IPV4 dynamic routing, RIPv1/v2, OSPFv2, 4000 routing entries

    IPV6 dynamic routing OSPFv3, RIPng, IPV6 management, 1000 routing entries

    L3 network management function, IPV4/IPV6 dual-stack management

    Layer 3 routing and forwarding, support communication between different network segments and different VLANs

    STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol

    Spanning Tree Protocol

    IGMP (v2/v3) snooping
    IGMP querier
    Up to 256 multicast groups

    IGMP Snooping

    MLD Snooping

    MLD (v1/v2) snooping, up to 256 multicast groups

    Access Control List

    IPv4/IPv6 IP-based ACL / MAC-based ACL

    Temperature: -40 ~ 85 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)

     

    Storage

    Security

    IEEE 802.1X port-based authentication
    Built-in RADIUS client to co-operate with RADIUS server
    RADIUS / TACACS+ user access authentication
    IP-MAC port binding
    MAC filtering
    Static MAC address
    DHCP Snooping and DHCP Option82
    STP BPDU guard, BPDU filtering and BPDU forwarding
    DoS attack prevention
    ARP inspection
    IP source guard


     

    8 mapping ID to 8 level priority queues 
    - Port number 
    - 802.1p priority
    - 802.1Q VLAN tag
    - DSCP field in IP packet
    Traffic classification based, strict priority and WRR

    QoS

    RFC 1213 MIB-II
    RFC 1215 Generic Traps
    RFC 1493 Bridge MIB
    RFC 2674 Bridge MIB Extensions
    RFC 2737 Entity MIB (Version 2)
    RFC 2819 RMON (1, 2, 3, 9)
    RFC 2863 Interface Group MIB
    RFC 3635 Ethernet-like MIB

    SNMP MIBs

    Secure Management Interfaces

    SSH, SSL, SNMP

    Management Functions

    Web browser / Telnet / SNMP v1, v2c, V3
    Firmware upgrade by HTTP / TFTP protocol through Ethernet network
    Remote / Local Syslog
    System log
    LLDP protocol 
    SNTP

    Basic Management Interfaces 

    Standards Compliance 

    IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    RFC 3810 MLD version 2

    Standards Conformance 

    FCC Part 15 Class A, CE 

    Regulation Compliance 

    Temperature: -40 ~ 85 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)

    Operating

    Environment 

  • Industrial Network PoE Switch Solution

    Providing up to 24  interfaces, the IES7521-24GE4TF-AC Industrial swtich can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 24 IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation thus makes the installation of IP cameras or wireless AP easier and more efficient.

    PoE

     

     

     

  • Datasheet

Managed Industrial Switch

Inquiry
 
Verification code