8 Ports 10/100/1000Mbps Managed Industrial PoE Switch with 4 Gigabit SFP
IES7510-8PGE4GF-DC
--- 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
IEEE 802.3at PoE+ port
--- 2 1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
--- One RJ45 console interface for basic management and setup
--- DIN rail and wall-mount design
--- Contact Discharge 8KV DC;Air Discharge 15KV DC
--- -40 to 85 degrees C operating temperature
--- Full Layer2 Web managent
Designed for Video Security solution
-
Highly Convenient and Distance Extendable Industrial PoE Switch
Benchu Group Industrial Power over Ethernet (PoE) Solution includes Industrial Rack-mount PoE Switches, DIN-rail PoE Switches, Industrial PoE Media Converters, Industrial PoE Extenders/Splitters series,, fully compliant with standard IEEE 802.3af and IEEE 802.3at 。With power and data over Ethernet from one unit, the Industrial PoE series can reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power lowers the installation costs, simplifies the installation effort and eliminates the need for electricians or extension cords.
44-56V DC
Redundant Power Input
4x 1000X SFP Slot
8x 10/100/1000M RJ45
IP40 Rugged Case
This Industrial PoE switches is a cost-efficient solution and meets the high reliability requirements demanded by industrial applications such as factory assembly line, automation, transportation and heavy Industrial factory, This Hardened PoE/PoE+ switches are designed to operate at -40 to 85°C in harsh environments where high ESD, shock and vibration ma be present and to provide an economical solution for your industrial Ethernet network.
The switches can be easily installed on a DIN rail as well as in distribution boxes. The DIN-rail mounting capability, wide operating temperature capability, and the IP40 housing with LED indicators make the plug-and-play switches easy to use and reliable.
Flexible and Easy Installation with Limited Space
This industrial switch is specially designed to be installed in a narrow environment, such as wall enclosure. It can be installed by fixed wall mounting or DIN rail, thereby making its usability more flexibly and easily in any space-limited location.
DIN-rail Mounting
Wall Mounting
Environmentally Hardened Design for Industrial PoE Networks
The IES7510 series Industrial PoE switch is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. It is packaged in a compact, IP40 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. With IP40 rugged case protection and PoE design, It is also ideal for service providers, campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 85 degrees C, so it can be placed in almost any location.
Flexibility and Extension Solution
The additional two mini-GBIC SFP slots built in the switch support dual speed, 1000BASE-SX/LX SFP fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and to 20/40/60/100/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Efficient Secure Management Interface
For efficient management, the Benchu Group IES7510 series managed PoE switch is equipped with Web and SNMP management interfaces. The embedded Device Managed System (DMS) features provides users with the benefits of easy-to-use/configure/install/troubleshoot in the video surveillance, wireless access, and other SMBs and Enterprises applications. It is ideal to deliver management simplicity, better user experience, and lowest total cost of ownershipPlug and Power Network Deployment
All of the RJ45 copper interfaces in the switch support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
IES7510-8PGE4GF-DC
8 Ports 10/100/1000Mbps managed Industrial PoE swtich with 4 Gigabit SFP Uplink ,6KV surge protection,IEEE802.3af/at
Ordering Information
Redundant Ring, Fast Recovery for Critical Network Applications
The IES7510 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 20ms.
-
Hardware Specifications
Copper Ports
8 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port
4 x 1000BASE-X SFP interface
SFP/mini-GBIC Slots
Jumbo Frame
10K bytes
8 ports with 802.3at / af PoE injector function with port-1 to port-8
PoE Injector Port
Console
1 x RS232-to-RJ45 serial port
Switch Architecture
Store and forward
Switch Fabric
24Gbps / non-blocking
Reset Button
< 5 sec: System reboot; > 5 sec: Factory default
PWR, SYS, LNK/ACT, PoE-in-Use
LED
Link Aggregation
IEEE 802.3ad LACP and static trunk
Supports 8 groups of 8-port trunkPower Requirements
44~56V AC
Dimensions (W x D x H)
45 x 100 x 179 mm(1.77in x 3.93in x 7.05in)
ESD Protection
Contact Discharge 8KV DC;Air Discharge 15KV DC
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)GVRP
VLAN
Per port 52V DC, 30.8 watts (max.)
PoE Power Output
Weight
0.95Kg
IEEE 802.3x pause frame for full-duplex;Back pressure for half-duplex
Flow Control
Address Table
16K entries
17.86Mpps
Switch Throughput@64Bytes
TX / RX / both;Many-to-1 monitor
Port Mirroring
Layer 2 Functions
240W
PoE Power Budget
PoE Power Supply Type
End-span
1/2(+), 3/6(-)
Power Pin Assignment
Power over Ethernet
IEEE 802.3af / 802.3at PoE+ PSE
PoE Standard
4.2 megabits
Shared Data Buffer
PoE Management
Open or close port
Standard POE scheduling management Power and current display
Automatic restarting function of equipment dead machine Timing reactivation
Support IP bindings restartingSTP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree ProtocolSpanning Tree Protocol
IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groupsIGMP Snooping
MLD Snooping
MLD (v1/v2) snooping, up to 256 multicast groups
Access Control List
IPv4/IPv6 IP-based ACL / MAC-based ACL
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Security
IEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS / TACACS+ user access authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
8 mapping ID to 8 level priority queues
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP field in IP packet
Traffic classification based, strict priority and WRRQoS
RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIBSNMP MIBs
Secure Management Interfaces
SSH, SSL, SNMP
Management Functions
Web browser / Telnet / SNMP v1, v2c, V3
Firmware upgrade by HTTP / TFTP protocol through Ethernet network
Remote / Local Syslog
System log
LLDP protocol
SNTPBasic Management Interfaces
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2Standards Conformance
FCC Part 15 Class A, CE
Regulation Compliance
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)Operating
Environment
-
Industrial Network PoE Switch Solution
Providing up to 8 PoE+ interfaces, the IES7510 series Industrial PoE swtich can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation thus makes the installation of IP cameras or wireless AP easier and more efficient.
PoE
-
-
2020-06-28 8GP-4GF-L2(IES7510-8PGE4GF-DC).pdf
끂967 991.21 KB
Datasheet
-
끸
|
|
|
|
|
|
|
|
|
|
local Lan
+86 755 23246531 sales@benchu-group.net www.benchu-group.net