Single-Port Gigabit Mini PoE Injector
PSE102-GE-Mini
--- All-in-one compact size design
--- Fully IEEE802.3af/IEEE802.3at compliant
--- Auto detection and protection of Non standard
Ethernet terminals
--- 10/100/1000 Mbps supported
--- Plug & Play. No configuration required
Designed for Video Security solution
-
All-in-One and Compact Size Design
With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, Benchu Group PoE Injector is an all-in-one, single-port PoE+ injector with internal power supply. In the compact size housing and it provides one 100-240V AC input socket on its front panel, two LEDs (System POWER and PoE ACTIVE) on the top side and two RJ45 ports (PoE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and this PoE injector is ready to provide high-speed network communication and ultra power PoE injector functions simultaneously with no need of software configuration.
Quick and Easy Gigabit Power PoE Network Deployment
The PoE Injector is a Single-Port, Ultra Power over Ethernet Injector with a maximum of 30 watts of power output over Ethernet cables. It is designed specifically to meet the demand for growing high power required network equipment such as:
--- PTZ Speed Dome
--- AIO (All-in-One) touch PC
--- IP Securty Camera
--- Other network devices that need higher power to work normally1ch 10/100/1000M PoE Injector.30W
PSE102-GE-Mini
PSE102-Mini
1ch 10/100M PoE Injector.30W
Ordering Information
Quick and Easy Cabling Installation for PoE Network Deployment
Backward compatible with both 802.3af and 802.3at PoE standards, the PoE Injector allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. It frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
-
Hardware Specifications
Interface
“Data” Input Ports: 1 x RJ-45
“Data+Power” Output Ports: 1 x RJ-4510/100/1000Mbps
Data Rate
LED
PWR/POE
10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)Network Cable
Operating: 5~90%, (non-condensing)
Storage: 5~90% (non-condensing)
Humidity
FCC Class A, CE Class A
Emissions
Standards Conformance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at Enhancement Power over Ethernet
IEEE 802.3af Power over Ethernet
Standards Compliance
Operating: -20~55 degrees C
Storage: -40~75 degrees CTemperature
Environment
Weight
0.12kg
Dimensions (W x D x H)
52 x 70 x 30 mm (2.05in x 2.76in x 1.18in)
Power Requirements
90-240VAC ,50-60Hz
Hardware Specifications
PoE 52V DC, max. 30 watts
Power Output
Power over Ethernet
Power Pin Assignment
4/5(+), 7/8 (-)
PoE Power Supply Type
Mid-span
-
PoE
PoE Optimizes the Installation and Power Management of Network Devices
This 1 port Power over Ethernet midspan Injector offer an easy,fast and cost effective solution for powering network video products,Power and Data are combined on a single cable, thus eliminating the need for extra power lines and also reducing installation costs and manpower.
PSE102-GE-Mini
PSE102-Mini
-
-
2021-05-19 PSE102-GE-Mini.pdf
끂579 684.99 KB
Datasheet
-
끸
|
|
|
|
|
|
|
|
|
|
+86 755 23246531 sales@benchu-group.net www.benchu-group.net